| |
Repsol Zeus EP GL-5 220
Description
Extreme pressure oils specially developed to meet the needs of all types of Bearings, both industrial and vehicle whooped gears. It is of particular interest in those plants having industrial gears as well as a large number of vehicles in constant use. That is, applications where oil consumption is high.
Recommended uses
They are oils for the lubrication of any type of vehicle gears, including whooped types, however they are also perfectly suitable for lubricating industrial gears, of whatever type and material, including bronze. Summarizing, these oils are for all types of splash lubricated gears including enclosed worm gear drives, that operate under heavy loads, high speeds and high temperatures.
Properties
Good load capability.
Rapid separation of water.
Outstanding in-service perfomance.
Reduces the number of types of lubricants required.
Low pour point.
Quality level
MIL-L-2105 D API: GL-5
US Steel-224 ISO 3498 ¡Ì CKC
AGMA 250.04 ISO 6743/6 ¡Ì CKD
DIN 51517 Part 3-CLP
Technical Characteristics
- |
UNITS |
METHOD |
VALUE |
VALUE |
VALUE |
SAE Grade |
- |
- |
80W |
90 |
140 |
ISO Grade (approx.) |
- |
- |
100 |
220 |
460 |
Viscosity, 100¡İC |
cSt |
ASTM D 445 |
11 |
17,6 |
28,8 |
Viscosity, 40¡İC |
cSt |
ASTM D 445 |
98 |
198 |
400 |
Viscosity Index |
- |
ASTM D 2270 |
95 |
95 |
95 |
Pour Point. |
¡İC |
ASTM D 97 |
-25 |
-18 |
-18 |
Flash Point |
¡İC |
ASTM D 92 |
200 |
210 |
220 |
F.Z.G. stage, m¨ªn |
- |
DIN 51354 |
12 |
12 |
12 |
Timken load |
lbs. |
ASTM D 2782 |
60 |
70 |
70 |
Available in
185 Kg. Drums.
Hazard Identification
This product is not classified as toxic or hazardous under current legislation.
Handling
Certain minimum precautions to avoid prolonged contact with the skin should be taken when
handling. The use of gloves, visors or masks is recommended in order to avoid splashes.
Health and safety hazards
Inhalation: Minimum risk of inhalation as it is a non-volatile product.
Ingestion: Does not provoke vomiting. Drink water. Seek medical assistance.
Contact with Skin: Wash with abundant water and soap.
Eyes: Wash with abundant water.
General measures: Seek medical assistance.
Fire fighting measure
No special measures are required.
Fire control: Foams, dry chemicals, CO2, water spray. Do not apply water jet directly as this may cause the product to spread.
Environmental precautions
Danger of physical contamination in the case of spillage (water flows, coastal areas, the ground, etc.) due to its floating capacity and oily consistency which may cause damage to fauna and flora with which it comes into contact. Avoid its penetration into water containers or outlets.
Decontamination and cleaning: Treat as an accidental oil spillage. Avoid spreading by using
mechanical barriers and eliminate using both physical and chemical means. |
|
